Your position: Home > Top Brand > Others > Fangdajing

Double Deposit Discount Pre-Order
$1 Deposit, $1 Off!!!
GunDamit.com will match your deposit on pre-order items, contributing the same amount as your deposit toward the remaining balance.

Customers Who Viewed This Product Also Viewed

: [Pre-Order] KEEPGOING 1/12 Sengoku G Series S..; $Deposit $5.00
Full Price Unknown

: [Pre-Order] Action Toys Hikari Sentai Maskman..; $Deposit $3.00
Full Price Unknown

: [Pre-Order] Brutal Realm 1/12 God of Steel..; $Deposit $1.00
Full Price $53.99

: [Pre-Order] Brutal Realm 1/12 Red Haired Man..; $Deposit $1.00
Full Price $51.99

: [Pre-Order] Brutal Realm 1/12 Black Colored F..; $Deposit $1.00
Full Price $43.99

Description

Find Similar Products by Category

Theme Gundam Category Model Kit Brand Fangdajing Franchise Gundam Size / Scale 1/72 Availability Pre-Order

Fangdajing 1/72 Zaku II Gto Green/Grunt Version

Material: ABS
Scale: 1/72

Include:
- Main figure
- 2 Pairs of interchangeable hands
- Several weapons

Estimated Releasing Date: Late September, 2024

09/11/2024
Fangdajing 1/72 Zaku II Gto Green/Grunt Version
Pictures updated.

▼ FangDaJing's recently released Unicorn has been followed by this color-changing GTO Zaku in green. Compared to the previous red version, this time the overall design is mainly focused on color changes and some new features (after all, the original version was like this too). So let's briefly talk about the green version of the Zaku below.

▼ In terms of the parts
most of the main pieces have been color-changed, so the appearance of the parts such as the gloss is basically the same as the previous red version aside from the color difference. In addition to the color difference, the main parts of the body give off a similar overall appearance. The new features this time are mainly the chest armor and two machine guns. Because they are new features, the texture of the parts is matte, giving a cleaner and more comfortable look.

▼As for the fit of the parts, some adjustments have been made in this version. For example, positions where the external armor and joint combinations were too tight in the original red version have been rectified significantly this time. Most of the issues have been fixed, but there may still be some tight fitting in some joint support parts, especially in areas where ABS parts are used instead of PC parts from the original version. Therefore, there may still be a need to trim or drill some holes during assembly. Regarding the interference issue with the chest joint in the red version, it has not been addressed in this version, and one may still need to make modifications with a knife to resolve it for smooth movement.
As shown in the figure (red box part), the jack part of this part is too tight (these same parts used in the kit are the same) when combined, it is basically difficult to install in place, so it is necessary to do some operations such as reaming or adding lubricating fluid before installation, otherwise it will hurt the hand.

▼ The combined hole of the hip joint is also tight, and it must be properly clipped or reamed before installation.

▼ As has also been said before, joint fixed parts like this shape, the combination is basically tight, very difficult to install, so we must do a certain amount of treatment before installation, but it is important to note that some parts because of the bearing joint position (such as the sole of the foot, etc.) these positions do not make too loose, otherwise it will be due to insufficient support caused by various instability problems. Therefore, reaming treatment still needs attention. Individuals still prefer the operation of adding lubricating fluid (paste) to reduce the degree of combination.

▼ The combination of the knee joint is also tight, and it also needs to be reamed or lubricated, otherwise it is difficult to rotate the joint after playing.

▼ This transparent part on the two machine guns, because the combination is too loose, it is easy to fall, and it needs to be reinforced (the simplest is to use double-sided tape, glue a little bit at the bottom of the part to install it).

▼ As for the movable shoulder, in fact, it is the same as the red one before, because there was a mistake when turning the mold, which led to the movable interference and affected the range of motion. Here is the personal modification plan. 1. According to the left figure, first cut a gap in the position of the green shoulder joint part (as shown in the red box), because the original one has a gap here, so that the shoulder joint has an active position. If you take the red line as the base, it's going to be something like this
The gap of the strip.
2, the shoulder joint is the support piece, by the internal position (the position shown in the red box) diagonally cut OR cut off a part, because the part itself is also because of the enlargement of the thickness, will also cause shoulder interference.

▼ In terms of configuration, this time, in addition to adding two different styles of machine guns and some dedicated chest armor parts, everything else is basically consistent with the red version. Also, because various types of chest armor parts are included, theoretically, it is possible to recreate four different models of the Zaku: C type, C-5 type, C-6 type, and 06S (green). So, those who prefer a specific model can choose and assemble accordingly.